Aluminum template nine advantages:

1. Short construction period

Aluminum alloy building template system for the quick-release mold system, castable concrete 24 hours after the removal of the wall column template, 36 hours after the removal of the beam side of the template, 48 hours to remove the beam at the end of the board template (non-load), 12 days after the removal of the board Bottom bearing the pillar, 14 days after the demolition of the end bearing the pillars, 28 days after the demolition of the cantilever pillars. A set of aluminum alloy template normal construction can reach three or four days a layer, greatly saving the construction unit management costs.

2. The number of repeated use, the average use of low cost

Aluminum alloy building template system using the overall extrusion of aluminum alloy profiles to do the raw materials (6063-T6 and 6061-T6), processed into the project required by the size of the aluminum alloy template, a set of aluminum alloy template construction can be recycled Use about 200-400 times, the average use of low cost.

3. Construction is convenient and efficient

Aluminum alloy building template system assembly is simple, convenient, the average weight of 25KG / ㎡, completely by the artificial assembly, do not need any mechanical equipment to help (workers usually only need a small hook, a small hammer can be convenient) Skilled workers can install 20-30 square meters per person per day (compared with the wooden mold, aluminum mold workers only need to install wood workers 70% -80%, and do not need skilled workers, just before the installation of the construction staff For simple training).

4. Good stability, high bearing capacity

All parts of the aluminum alloy building template system are made of aluminum alloy plate assembly, the system is assembled to form a whole frame, the stability is very good; reasonable layout load bearing, bearing capacity can reach 30KN per square meter.

5. Wide range of applications, high recovery value

Aluminum alloy building template for wall, pillars, beams, horizontal floor, stairs, windowsill, drifting board and other locations to use; aluminum alloy construction template scrap, when the waste disposal residue high, sharing cost advantage.

6. Demoulding the surface effect after mixing

Aluminum alloy construction template in the pouring of concrete, the removal of the concrete surface after the removal of the quality of smooth, basically can meet the requirements of finishes and clear water, without the need for wholesaling, can save the bulk of the cost.

7. Convenient management on site

Aluminum alloy construction template system all parts can be reused, aluminum alloy construction and installation of the completion of the completion of the demolition of the scene without any garbage, the construction environment safe, clean and clean.

8. Standard, versatility, low carbon emissions

Aluminum alloy construction template size specifications, according to the project using different specifications template assembly, when used template used in new construction projects, only need to replace about 20% of the non-standard size specifications of the template, effectively reduce the cost. Aluminum alloy building template system All materials are renewable materials, in line with national construction projects energy saving, environmental protection, low carbon, emission reduction regulations. Many developed countries have already stipulated that construction projects are not allowed to use wood template construction, the need to use renewable materials template.

9. Support system is convenient

Traditional wood template construction methods in the floor, platform and other construction techniques commonly used full support, fee data, no operating space.